RGS Cleaning Ltd – external window cleaning from ground level using a water-fed pole supplied by a bowser, battery-powered pump and hoses, or a standard applicator/wetter and squeegee. Sequence: report to school contact; inspect work area and equipment; establish exclusion area; position and secure bowser; route hoses; clean accessible windows from stable ground; stop pump and depressurise hoses; pack away; inspect and hand back area.
Persons exposed
Type of assessment
Hazards and control measures
Hazard
Pupils, staff, visitors and other contractors entering the work area
Agree working times and areas with the school contact. Check whether holiday clubs, staff or other contractors are present. Establish a suitable exclusion area using barriers and signs before extending poles or running hoses. Keep entrances and emergency routes available. Stop work if anyone enters the exclusion area.
Confirm site occupancy, authorised access and suitable work segregation before starting.
Hazard
Trips from hoses, pipes and equipment
Route hoses around the perimeter of the work area wherever practicable. Keep hoses tidy and avoid loops across access routes. Protect unavoidable pedestrian crossings with suitable hose ramps and barriers. Keep tools and equipment within the controlled work area.
Check hose routes whenever moving to another elevation or window area.
Hazard
Slips from water runoff and wet surfaces
Check ground condition and drainage before starting. Control water flow and prevent pooling on paths, steps and entrances. Divert pedestrians from wet areas. Wear footwear with suitable slip resistance. Remove excess water where practicable and retain barriers until the area is safe.
Identify runoff routes and protect affected access points.
Hazard
Uneven ground, slopes, steps and obstructions
Inspect each working position for uneven paving, holes, slopes, drains, loose surfaces and obstructions. Work from firm, stable ground with adequate space and visibility. Reposition regularly instead of overreaching. Keep both feet on the ground when cleaning.
Identify safe standing positions for each elevation and report defects to the school contact.
Hazard
Pole or cleaning equipment striking people, windows or building fittings
Inspect poles, clamps, brush heads and attachments before use. Secure attachments and use equipment within manufacturer limits. Check clearance around windows, lights, gutters and fittings. Extend only as far as necessary and maintain control when raising, lowering and moving the pole. Keep others outside the potential fall and swing area.
Agree exclusion distances appropriate to pole length and available space.
Hazard
Overhead electrical lines, external electrical fittings and services
Check above and around each working area before extending poles. Keep poles, brushes, water jets and hoses clear of overhead electrical lines and exposed electrical equipment. Battery power removes the need for trailing mains supply cables, but poles and water can still present an electrical hazard near live services. Stop and obtain a safe arrangement if electrical hazards could be reached by the equipment.
Check for overhead lines and vulnerable electrical fittings at each elevation.
Hazard
Manual handling of bowser, pump, hoses and equipment
Assess load weight, route, ground condition and handling method before moving equipment. Use suitable wheels or handling aids and assistance where required. Avoid lifting a filled bowser. Move equipment within manufacturer limits and keep routes clear. Secure equipment during transport and use.
Confirm bowser handling arrangements and a suitable unloading and positioning area.
Hazard
Musculoskeletal strain from pole use and repetitive cleaning
Use a suitable pole for the required reach and keep extension to the minimum necessary. Maintain a balanced stance, keep the pole close to the body and avoid prolonged reaching or twisting. Reposition feet to follow the work. Alternate tasks and take recovery breaks appropriate to the activity. Stop if pain or loss of control develops.
Adjust task duration and working position to the operative and conditions.
Hazard
Bowser movement, instability or collision with vehicles
Position the bowser on firm, suitably level ground away from vehicle movements, pedestrian routes and emergency access. Apply brakes, chocks or other securing arrangements appropriate to the equipment. Secure the tank, pump and associated equipment. Keep hoses clear of moving vehicles.
Agree equipment location and any vehicle segregation with the school contact.
Hazard
Pump, hose or coupling failure and uncontrolled water release
Before starting and whenever repositioning
Complete equipment checks and rectify defects before use.
Hazard
Battery damage, short circuit, overheating or fire
Check the battery, enclosure and connections for damage or leaks. Secure the battery and protect terminals against short circuits. Keep the battery and pump controls protected from water as required by the manufacturer. Use the correct battery and charger. Stop use if the battery becomes damaged, unusually hot, swollen or leaks. Follow manufacturer emergency instructions and keep escape routes clear.
Confirm battery condition and manufacturer operating instructions before use.
Hazard
Adverse weather, wind, lightning, heat and freezing conditions
Check conditions before starting and monitor changes. Stop pole work when wind affects control or lightning threatens. Suspend cleaning if runoff could freeze or safe footing cannot be maintained. Provide suitable clothing, drinking water and sun protection in hot weather. Resume only when conditions permit safe work.
Review weather and exposed working positions before starting.
Hazard
Contaminated water systems, cleaning products and poor hygiene
Maintain and clean the bowser, tank, hoses and brush in accordance with supplier instructions. Avoid prolonged storage of stagnant water and unnecessary spray or mist. Use only products assessed as suitable for the task and follow their COSHH assessments and dilution instructions. Wear suitable gloves where required, cover cuts and wash hands before eating or drinking.
Confirm water-system maintenance and identify any detergent requiring a COSHH assessment.
Hazard
Damaged glazing, emergencies and inadequate communication
Inspect windows visually and avoid applying pressure to cracked, loose or damaged glazing. Report defects and leave affected windows until a safe arrangement is agreed. Sign in and out as required. Confirm the school contact, first-aid arrangements, emergency access and assembly point. Carry a charged phone and follow agreed contact arrangements if working alone. Stop work, isolate equipment and secure the area following an incident.
Confirm site emergency arrangements and record any glazing defects before cleaning.